The No. 1 choice of signmaking professionals worldwide,
CAMM-1:Now Even Better

Max. Cutting Width
280mm

Max. Cutting Width
584mm
The Standard in Desktop Signmaking
for Windows® 98/95, Windows NT® 4.0, Windows®2000

Cutting-Edge Technology / Unmatched Reliability / Easy to Use

The Sign Shop Workhorse
Roland's reliable, easy-to-use CAMM-1 desktop vinyl cutters are the No. 1 choice of signmaking professionals worldwide. And, now, performance is even better with the new CX-24/12 models.

Cutting-Edge Performance
Signmaking professionals demand the latest technology. The CX-24/12 delivers cutting-edge performance with an advanced curve-smoothing function to cut circles and curves faster than ever with higher precision. Resulting throughput is an average of 10%(1) faster than previous models. The test-cut function allows you to check the machine's down force before actual cutting to get exactly the cut you want. Blade-offset values can be adjusted manually for optimum results for a wide range of vinyl and specialty substrates including sandblast(2).

You can store up to 8 settings of regularly used blade and media combinations, so you don't have to repeatedly recalculate. Every CX-24/12 comes with a precise cutting blade that gives you control over everything from illustrations to letters, while the optional small-lettering blade offers sharp, high-quality small type and intricate designs. With an optional water-based fiber tipped pen, you can even check how finished jobs will turn out even before cutting.
The CX-24/12 delivers the quality, performance and reliability that maintain Roland's leadership in signmaking.

(1) In a comparison test conducted by Roland DG Corporation,thirteen different designs were cut by CX-24 and by CM-24. Results depend on image design and layout.
(2) CX-24/12 cuts sandblast up to 1.00 mm (0.0394 inch) thickness with the optional ZEC-U1715 blade.

Easy-to-Use
The CX-24/12 uses a new, large jog dial and LCD display. Setting menus is much faster and easier than before. The control panel and sheet set lever have been relocated closer together and a new cutter knife groove on the apron makes manual cutting simple. A sheet roller base(3) is attached to every CX-24 to keep media straight during feeding and new guide lines make it easy to check that media is properly aligned.

A Windows driver(4) comes with the CX-24/12, so you can output directly from vector-based design software(5) just like any desktop printer. CX-24/12 utilizes a replot function, allowing you to input data once and repeatedly output it without having to send it again from the computer. Thanks to a built-in 1 MB buffer, the CAMM-1 reduces computer time and ensures that operations run smoothly.

(3) Optional on the CX-12
(4) Windows® 98/95, Windows NT® 4.0, Windows® 2000 compatible
(5) Adobe® Illustrator® 7/8, CorelDRAW®8

Professional indoor signs and labels High-quality

window displays


outdoor signs


ye-catching vehicle graphics


Attention getting public signs Beautiful


Direction indicators

Environmentally Safe

Roland designed the CX-24/12 to optionally use vinyl chloride free media(6).
So you can offer environmentally safe signage to ecology-conscious clients.
Packaging materials are also made of recyclable Instapac® foam without any vinyl chloride.
Moreover, user's manual is completely paperless, provided on CD-ROM in PDF format.
(6) Available as an option is a non-chlorine olefin cutting sheet.

Major Features of the CAMM-1 Model CX-24/12

Specifications

Model CX-24 CX-12
Maximum cutting area* Width: 584 mm (22-15/16 in.)
Length: 24,998 mm (984-1/8 in.)		 Width: 280 mm (11 in.)
Length: 24,998 mm (984-1/8 in.)
Acceptable media widths 50 mm to 700 mm
(1-15/16 in. to 27-1/2 in.)		 50 mm to 395 mm
(1-15/16 in. to 15-1/2 in.)
Max. cutting speed During cutting: 400 mm/sec. (15-11/16 in./sec.)
(45-degree direction)(when [HEAVY] is selected on the display menu:
100 mm/sec.(3-7/8 in./sec.))
Blade force 30 — 200 gf
Buffer size 1 Mbyte (800 Kbytes for replot buffer)
Instruction system CAMM-GLIII (mode1 and mode2)
Power consumption Maximum: 0.9 A /100 — 240 V ± 10 % 50/60 Hz
Acoustic noise level [Cutting mode] : less than 70 dB (A)
[Standby mode] : less than 40 dB (A) (According to ISO 7779)
Dimensions 850 mm (W) x 300 mm (D) x
240 mm (H)(33-1/2 in.(W) x
11-13/16 in.(D) x 9-1/2 in.(H))		 545 mm (W) x 300 mm (D) x
240 mm (H)(21-1/2 in.(W) x
11-13/16 in.(D) x 9-1/2 in.(H))
Weight 14 kg (30.9 lb.) 10 kg (22 lb.)
Operating temperature 5 — 40°C (41 — 104°F)
Operating humidity 35% - 80% (non-condensing)
Accessories Power Cord, Roller Base (CX-24 only), Blade, Blade Holder (XD-CH3)
Startup Manual, To Ensure Safe Use, CD-ROM
(CAMM-1 Driver for Windows®, User's Manual)

*This may be restricted by the program.

Options

Enviromentally Friendly POP Series Sheets
(Non-Chlorine Olefin Sheets)

Product number Size Description
POP-210-BK10 210 mm x 10 m Black, 1 roll
POP-210-WH10 White, 1 roll
POP-210-RD10 Red, 1 roll
POP-210-GR10 Green, 1 roll
POP-210-YE10 Yellow, 1 roll
POP-210-BL10 Blue, 1 roll
POP-305-BK10 305 mm x 10 m Black, 1 roll
POP-305-WH10 White, 1 roll
POP-305-RD10 Red, 1 roll
POP-305-GR10 Green, 1 roll
POP-305-YE10 Yellow, 1 roll
POP-305-BL10 Blue, 1 roll
POP-610-BK10 610 mm x 10 m Black, 1 roll
POP-610-WH10 White, 1 roll
POP-610-RD10 Red, 1 roll
POP-610-GR10 Green, 1 roll
POP-610-YE10 Yellow, 1 roll
POP-610-BL10 Blue, 1 roll
POP-210-AP10 210 mm x 10 m Transfer tape, 1 roll
POP-305-AP10 305 mm x 10 m Transfer tape, 1 roll

*If the surface becomes covered with dirt and dust, wipe with water or neutral detergent. Do not use organic solvents or alcohol which can damage the material.
*These sheets are slightly harder than commercially available vinyl sheets. Roland recommends cutting these sheets with the blade (model: ZEC-U5025) designed for cutting fluorescent andother types of hard sheets.
*These sheets, except black, are more transparent than commercially available vinyl sheets.
Before gluing onto other sheets or darker materials, be sure to check that you are satisfied with the finished
look of the job.

Blades

Product number Offset value Applicable cutting material Quantity per package
ZEC-U1005 0.25 mm Signage vinyl in general 5 pcs.
ZEC-U5025 0.25 mm Thick, reflective and fluorescent vinyl,
as well as signage vinyl in general		 5 pcs.
ZEC-U3017 0.175 mm Signage vinyl in general
For cutting small letters or
intricate designs		 5 pcs.

Blade Holders

Product number Description Specifications
XD-CH3 Blade holder with blade
extention adjuster,
made of resin		 Standard blade holder for working with
signage vinyl in general.
XD-CH2 Blade holder with blade
extention adjuster,
made of aluminium		 Blade holder for signage vinyl in general as
well as thicker material. It also performs
very well when creating detailed cutting.

Roller Base

Product number Type of support Material Specifications
RSB-20 Four-point support Resin It is useful when working with rolled vinyl.
Accommodates rolls of 300 mm (11-13/16 in.)
width or wide.
Rolls shorter than 300 mm cannot
be accommodated.
Optional Stand
PNS-24
for CX-24

Roland reserves the right to make changes in specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland dealer for details. No guarantee or warranty is implied other than expressly stated. Roland shall not be liable for any incidental or consequential damages, whether foreseeable or not, caused by defects in such products.

*Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.

All American Mfg. & Supply
495 E. Erie Ave.
Phila, PA 19134
(215) 634-2235   Fax (215) 634-5566

Contact Us